Here is a DIY on making patchwork pads for hot pots.
I took inspiration from bright autumn flowers of physalis to create this cute little thing. Red-orange and light green patches of American cotton look unusually harmonious and create a positive and happy mood!
I like quilted hexagon blocks of "Granny's garden", but they are too complex to make, so I always put the work off indefinitely. Then I thought why not to make something of hexagons using an applique technique and started working.
So, you will need the following:
- red, orange and green cotton;
- linen for the bottom side of the pad;
- a small piece of white cotton for the base of the applique;
- double-sided fusible woven web;
- wool filler for quilting or padding polyester;
- thread, scissors, a pencil, a water-soluble marker, a ruler.
Make a template for the future pad from construction paper: draw a circle with a diameter of 19 cm using a compass. If you don't have a compass draw the countour out on a sheet of paper using a plate of an appropriate diameter :)
Now, remember the school geometry course and draw a hexagon with 3 cm wide sides. You can also find a hexagon on the Internet, enlargen it and draw out directly from the monitor!
Cut out:
- colored cotton: 6 hexagons of red-orange cotton and 13 green hexagons;
- white cotton: a circle by a pattern with the addition along the contour of 1.5 cm (the addition makes it easier to align the finished applique);
- linen: a circle by a pattern with addition of 1.5 cm along the contour;
- fusible web: a circle by a pattern;
- padding polyester: two circles by a pattern.
Put the fusible web on a white cotton circle, then add colored hexagons forming a flower.
Carefully iron on, try not to move the hexagons.
The result should be like this:
Put a "sandwich" together: the top of hexagons, a circle of padding polyester and a piece of white cotton. I want to draw your attention to the fact that we will not quilt all the layers of the base at once, we will quilt the top and then connect it with the bottom side of the linen. We do so because quilting of the top is made with decorative stitching on a sewing machine. If you quilt all the layers at once the bottom of the pad won't look neat, there will be the ends of the thread. In my case the back side will be neat.
Pin everything together, set the sewing machine on a decorative stitch (or zigzag), and stitch all the sections of hexagons.
In the end, here what a beauty we have!
Use a pattern and a water-soluble marker to draw the outline of the pad on a patchwork element, cut the extra.
Make one more "sandwich" with a linen bottom, a layer of padding polyester and a quilted top. Pin everything together and stitch exactly in the seam on all sides of the hexagons. It is convenient to use a monofilament thread — it is hardly visible from the front side of the product and it doesn't spoil the look of decorative stitches.
That's what we get on the front and the back side:
Now make a bias tape for the edges of our pad. Cut a strip of cloth with a width of 3.5 cm and a length of 62 cm. Cut a small piece of satin ribbon (or cotton lace) for a loop.
Turn down the edging to the bottom side, pin open cuts and carefully turn down and stitch the edge by hand. I prefer to stitch a bias tape by hand, I always use this method, it looks nice on both sides. You can do that using a sewing machine, but in this case, you should always try to keep the line smooth on both sides.
That's all! Our pad for hot pots is ready! Admire the result!