DIY Project on How to Create a Ring Gift Box

A beautiful package for a gift is a very useful thing to have, so I will show and tell you how I made a gift box for a ring. I wanted to make something easy, complementing a jewelry, combining with it.

I have prepared a template to print on A4 — it will make the work easier and the result will please you.

The template created by me is for personal use, please do not use it for commercial purposes, and if you copy this material, post a direct link to the source.

You need:

1. Bookbinding cardboard 2 mm thick, 1/4 of A4 sheet is enough.

2. A printed pattern — on ordinary or adhesive paper.

3. Ordinary stick glue, PVA or Moment Crystal.

4. Metal ruler, construction / stationery / art knife, scissors.

5. Decorative notions — 2-3 brads, corners, satin ribbon.

I apologize for the photo quality, today it's somewhat lower than usual.

Cut out the parts of box and glue them on the cardboard.

Cut out all parts with the knife and ruler. Details can be divided into three groups: for manufacture of the box, cover and lid.

Take the box pieces and carefully stick them.

The box should be smooth and neat.

Take a printout and cut out the remaining details.

Apply them:

Consistently glue the details to all sides:

Now glue the parts to the inside:

The lid:

Now the cover:

Bend the edges to the inside:

Now put these all together:

Before the final assembly, glue the ribbon on the cover.

Glue a tag, fasten all with brads in several places.

Now glue the box and lid into the cover.

The last step — take the last detail, which would hold the ring and fold as shown in the photo.

Insert it inside the box.

Optionally, you can add metal corners.

Done! You can pack a gift :)