Copper

I offer you a tutorial on how to create a pendant made of copper sheet and filled with "jewellery" epoxy resin.  You will need: - large gas burner; - small pliers, round pliers, wire cutters, tweezers, metal scissors; - file, sandpaper; - anvil and hammer (can be two hammer-one in as an ...

I used a part of watches for this pendant as a base ;)You need the following materials and tools: watch glass copper wire 1.1 mm copper wire 0.3 mm alcohol (to degrease) stained glass paints and glass contour decorations wire cutters pliers a small hammer with an anvil to slightly flatten the wire ...

You need: - wire 1.5 mm diameter for the frame - wire 0.6 mm for ornament - wire 0.3-0.4 mm for braiding - pliers - cutters - chain - beads - paper flowers - a hammer with an anvil — optional, if you want to beat the frame  Make a sketch :) Then the frame, you can process in on the anvil: Add ...

Today I want to make a jewellery in the hippie-boho-tribal style out of scrap shards, in other words, recycle pieces of old glass and clay. You need: various shards tools — pliers, round nose pliers engraver drill (you can do without it) copper sheet copper wire beads stick gas burner solder all ...

This master class would help you to learn how to make jewelry from metal.  All starts with a sketch. Now materials and tools. You need: Copper sheet (0.2 mm). Copper wire of different thickness. Copper earring fixtures. Red beads / coral. Gas burner. Borax. Zapon varnish. Brush, marker. Needle ...

I want to share a small photo report about the main stages of creating my new set of copper jewellery — Ivan Kupala Night. Many people are surprised that a woman is a metalsmith. I hope to answer some questions. The process of creating any new item almost always begins with the selection of stones. ...

I have already started preparing for the New Year holidays! :) Although the idea to make a horseshoe was born by accident, it turned to be very timely! :). You need: - copper wire d = 2; 1; 0.6 and 0.4 mm (can be replaced by knitting wire) - 4 jewellery rings - 4 large oval beads - 3 pins with ...

I was asked to tell how I make hairpins a couple of times, in particular this touched upon the easiest one, called Green Garden. I decided to illustrate the whole process to make clear. :-)  So I hope it would be useful) What you need: 1 – Copper or brass wire of 1.5 mm diameter for base and of ...