The ceramic bowl in the collection. Chandelier made of metal or wood

The finished ceramic lampshades for chandeliers is a great solution for creative and rational masters

Attention blacksmith and carpentry shops. And who decided to make a chandelier yourself.

Ladies and gentlemen!
We present to your attention an exquisite ceramic bowl handmade (complete).
If you are building the chandelier yourself, for example, of wood or metal (forged or welded) and you need to complement the chandelier canopy from pottery, then our offer is for you!

Advantages
The versatile design of the canopy and its logical mount suitable, perhaps, for all types of chandeliers.
It is sufficient to Unscrew the top to one nut-ball, insert the dome light Assembly in a pre-drilled hole (13-14 mm) of your design, put the nut into place and connect the wires (in the kit) to the wiring.
The ceiling can be any. Diameter 23 Smith collection Chernyakhovskaya (as pictured) or the collection of "Blackened" (svetilniki in the store )
If you choose a shade from the collection "Blackened", in this case a dome lamp assy for your chandeliers will cost 3500 rubles..
For the rest of the ceiling, contact me.

Price is per single shade in the collection.
Within this cost you will get a unique solution of handwork which cannot be found in the major retail stores and networks. Your chandelier will be the exclusive.

DETAILS
Ceramic dome light Assembly for later installation in the design of the chandelier (wrought-iron or wooden).
The diameter of the plafond is 23 cm.
Ceiling height of 5 cm.
Overall height (lamp and bowl) 10 cm.
The luminaire can be with openings of geometric shapes, and without them.

The length of the tube for fastening the design of the chandelier depends on the thickness of the part where you attach the shade to your chandelier, but not less than 20 mm. Please this question should be specified before ordering.

Use
The lampshade Assembly is used for further installation in the base of the chandelier, made of metal, wood or other material.

Technology
All ceramic parts are made out of clay by hand on a Potter's wheel.
Surface glossy (smooth with sheen).
Ceramics toned milk.

Technical information
Electric double-insulated wire removed from the side tube fixing. The length of the wire is determined before the order (depends on the design of your chandelier). Place the output wire from the mounting tube is additionally protected by another insulation layer.
Cartridge ceramic, E27 led lamp bulbs 100W maximum power.
The whole structure with electrical connections are hidden inside.
Bonded ceramic part decorative sleeve made of brass.
The weight of the ceiling Assembly is 800-1000 grams (depending on shade).

More information on this offer will definitely look here www.livemaster.ru/topic/651281-gotovyj-keramicheskij-plafon-dlya-vashej-lyustry?vr=1&inside=1