'Star anise (star anise)' silicone mold, Molds for making flowers, Zarechny, Фото №1
$7.60
Made to order 
Способ оплаты уточните у продавца 
Description
Delivery in Russia is FREE for orders from 7000 rubles!
-------------------------------------------------------------------------
Attention!
The price in the basket is indicated for a mold made of translucent silicone.
If you need a mint silicone mold,
write about it in the comments to the order,
and I will recalculate the order amount manually.
-----------------------------------------------------------------------------
Mold made of translucent silicone - 700 rubles
Mint silicone mold - 820 rub
-----------------------------------------------------------------------------
About silicones:
- Both silicones are food grade, can be used even with clay, even with food
- Translucent silicone is slightly softer than mint
- In translucent molds, the fullness of the mold is visible, in mint ones it is not visible
- Translucent silicone made in China, mint made in the USA
- Durable
- Heat resistant
- Flexible
Mold can be used for:
* any polymer clay ( baked, self-solidified, marshmallow, cold porcelain);
* caramel, candy, chocolate, sugar mastic;
* epoxy;
* soaps;
* candles;
* plaster, plastic liquid;
* metals with a low melting point up to 265 degrees (mint silicone).
Mold allows you to convey the smallest details of a real star anise from all sides, as it was made from real cacti.
In the photo, a star anise made of self-curing polymer clay, molded with the help of this mold.
---------------------------------------------------------------------------------
Author's development of mozza-flowers . Copy forbidden.
-------------------------------------------------------------------------
Attention!
The price in the basket is indicated for a mold made of translucent silicone.
If you need a mint silicone mold,
write about it in the comments to the order,
and I will recalculate the order amount manually.
-----------------------------------------------------------------------------
Mold made of translucent silicone - 700 rubles
Mint silicone mold - 820 rub
-----------------------------------------------------------------------------
About silicones:
- Both silicones are food grade, can be used even with clay, even with food
- Translucent silicone is slightly softer than mint
- In translucent molds, the fullness of the mold is visible, in mint ones it is not visible
- Translucent silicone made in China, mint made in the USA
- Durable
- Heat resistant
- Flexible
Mold can be used for:
* any polymer clay ( baked, self-solidified, marshmallow, cold porcelain);
* caramel, candy, chocolate, sugar mastic;
* epoxy;
* soaps;
* candles;
* plaster, plastic liquid;
* metals with a low melting point up to 265 degrees (mint silicone).
Mold allows you to convey the smallest details of a real star anise from all sides, as it was made from real cacti.
In the photo, a star anise made of self-curing polymer clay, molded with the help of this mold.
---------------------------------------------------------------------------------
Author's development of mozza-flowers . Copy forbidden.
How to keep
Self-hardening clay (or sugar mastic):
- Very carefully fill the mold with clay, tamping,
- Remove excess clay that comes out
- Stick the wires with loops at the end,
- Put the filled mold in the freezer for 3-4 hours
- Remove the mold from the freezer and immediately remove the berries, pushing with your thumbs from below, and gently pushing the holes apart from above.
- Stick them to dry in floral foam
- When dry, cut off the excess with scissors or a scalpel.
!(put the mold with sugar mastic in the microwave for a while before the freezer, so that the mastic softens and fills the mold better)
Bake clay:
All actions are the same.
- you can bake the clay directly in the mold for 30 minutes, remove the berries after cooling, and then tinted,
- you can first freeze in the freezer for 3-4 hours, take out the berries, tinted, and then bake the berries in the oven according to the instructions,
- after cooling, remove excess clay with sandpaper or a scalpel
- Very carefully fill the mold with clay, tamping,
- Remove excess clay that comes out
- Stick the wires with loops at the end,
- Put the filled mold in the freezer for 3-4 hours
- Remove the mold from the freezer and immediately remove the berries, pushing with your thumbs from below, and gently pushing the holes apart from above.
- Stick them to dry in floral foam
- When dry, cut off the excess with scissors or a scalpel.
!(put the mold with sugar mastic in the microwave for a while before the freezer, so that the mastic softens and fills the mold better)
Bake clay:
All actions are the same.
- you can bake the clay directly in the mold for 30 minutes, remove the berries after cooling, and then tinted,
- you can first freeze in the freezer for 3-4 hours, take out the berries, tinted, and then bake the berries in the oven according to the instructions,
- after cooling, remove excess clay with sandpaper or a scalpel
Доставка и оплата
Доставка по стране
(Russia)
from
$4.34
Условия и сроки доставки можно узнать у продавца до совершения покупки
Free shipping
При покупке на сумму от $75.98
С этим товаром покупают
Related searches
Powered by Yandex.Translate
"Star anise (star anise)" silicone mold
$7.60