In stock
Machine -Micro Milling
Suitable for: -jewelers, watchmakers, modelers
The work is quiet, not audible:
Photos are not all included, there is a video write to whom you need
Inside:
300 watt machine motor
Engine -Revolutions from 500 to 9000
Collet cartridge on the EP -11 engine
The engine comes in a set of collet 15 pieces from 1 mm to 7 mm through the floor mm as well as 1,4 and 1,8 inches
Longitudinal movement- the handle of longitudinal movement
Trapezoidal screw one turn two mm
Nonius one ten
Transverse movement-vernier one dozen one revolution two mm stroke transverse
and a longitudinal table in both directions 70 mm
Vertical stroke of 50 mm -one revolution of two mm ,vernier of 4 acres
Turning on the rear
Revolutions under the machine
Table 130mm by 185 mm
There are vises, knee sponges 550 x 130 mm, sponges open by 70 mm
The vise is placed at least along or across
Rotary table F-110 T-shaped groove 8h4 mm,there is a quick turn of the table
A set of cutters from 1mm to 5 mm Drill bits from 0.5 m to 1 mm through a dozen
Machine size 250h250h370
Machine weight 5500 grams
There are characteristics
Suitable for: -jewelers, watchmakers, modelers
The work is quiet, not audible:
Photos are not all included, there is a video write to whom you need
Inside:
300 watt machine motor
Engine -Revolutions from 500 to 9000
Collet cartridge on the EP -11 engine
The engine comes in a set of collet 15 pieces from 1 mm to 7 mm through the floor mm as well as 1,4 and 1,8 inches
Longitudinal movement- the handle of longitudinal movement
Trapezoidal screw one turn two mm
Nonius one ten
Transverse movement-vernier one dozen one revolution two mm stroke transverse
and a longitudinal table in both directions 70 mm
Vertical stroke of 50 mm -one revolution of two mm ,vernier of 4 acres
Turning on the rear
Revolutions under the machine
Table 130mm by 185 mm
There are vises, knee sponges 550 x 130 mm, sponges open by 70 mm
The vise is placed at least along or across
Rotary table F-110 T-shaped groove 8h4 mm,there is a quick turn of the table
A set of cutters from 1mm to 5 mm Drill bits from 0.5 m to 1 mm through a dozen
Machine size 250h250h370
Machine weight 5500 grams
There are characteristics
How to keep
00
