Machine with square, stone cutting

I can sell the quadrant separately,
the price of the quadrant together with the machine are sold in a set of a square and a machine

Fully machine with a square price 120 rubles

The machine price is 000 thousand rubles
Square price 70 thousand rubles

I will produce exclusively only under the order with 000% prepayment.

Today I will tell you about a very important device for cutting
This is a machine for cutting stones, it is made at 50 volts:
The case is made of aluminum metal
Casing - stainless steel
Servo motor000 W
Speed adjustment from 50 to 220 thousand revolutions per minute
In the work :
We turn on the engine, the speed controller
Turn on the revs speed adjustment
How do we rotate the speed control
For example:
The number "550" is the pulleys, so one to two we get a total of 100 revolutions
if the number is "2000" - we divide it in half, then the total is 2 revolutions
and according to the scheme
Turn on turn off the machine as well as the speed controller
If you need rolling of round stones. Then we put the adjusting screw, lower it on it, cling to
twist and rotate the stone. At this time, we lower the distance by how much it is necessary to reach the faceplate.
It is IMPORTANT:
Also, so that the table does not vibrate and the machine does not shake at high speeds,
just be sure to do the balancing of the faceted faceplate.
How to balance the faceplate, see the following video. Follow the posts
The machine is only made to order https://youtu.be/atDzxZxB4yU