Unique power support for mounting and fixing heavy stone or other table top material to a vertical surface. The uniqueness of the project is to solve the problem of compensation of large loads with small forms of support systems. Perhaps this bracket is one of the few options that can solve this problem.
You can find brackets that can hold a heavy countertop weighing 50-100 kg, but, as a rule, these are rather bulky elements with protruding forms and not very aesthetic appearance. And to establish a table-top and at the same time to get rid of all "excess" under a table and to create impression of absence of support very much there is a wish.
You should pay attention to the bracket "KSM 260/400". The peculiarity of this bracket lies in its interesting parameter of one of the sizes. At length of 400 mm,height of 260 mm and width of 60 mm depth of its reinforcing struts on length of shelves of an arm makes no more than 20 mm. At the same time, the bracket perfectly copes with the load assigned to it.
There is this element of support one more pleasant moment. Very often (especially in the old housing stock) in places of the planned installation of countertops on the walls is a lot of communication systems of pipes. Carry or hide in the wall this engineering economy is quite troublesome and expensive. But the distance from the wall to the pipes can be placed between them "KSM 260/400" and without much difficulty to fix it on the wall. Thus, both pipes are intact and the head does not hurt. After that, install the sink.
This "trick" can be done not only with pipes, but also when installing console furniture elements, under which cabinets, washing machines, etc. will have to be located. When using these brackets, due to the unique size of 20 mm, under the installed objects there is a very large free space.
The bracket is made of steel sheet metal with a thickness of 4 mm. All-welded construction. Strengthening of the bracket is made in the form of three struts with a thickness of 4 mm. Thus, the entire load is distributed between the three stiffeners of the structure. In each shelf products are made of 5 holes with a diameter of 6 mm. This number of mounting points will allow you to securely fix the bracket to the wall. A secure mount must comply with the permissible load. When mounting heavy elements to the wall, the length of the dowel must be at least 8 cm and a diameter of at least 8 mm. The mounting screws must match the length of the dowel and the load on the gap when taking into account the weight. The bracket can withstand a weight of up to 100 kg or more, but it must be very firmly "tied" to the wall. Better with stock.
The scope of the supports is very different. For installation of table tops, cabinets, shelves of great depths. Installation of beams, steps, canopies, etc.
Colors of paint: black, white, bronze. Other colours are available on request.
size: 26h40h6 cm.
How to keep
When mounting heavy elements to the wall, the length of the dowel must be at least 8 cm and a diameter of at least 8 mm. The set screws must correspond to the breaking load when taking into account the weight. The bracket can withstand a weight of up to 100 kg or more, but it must be very firmly "tied" to the wall. Better with stock.
Доставка и оплата
Other methods
Доставка от продавца
Способы доставки и оплаты уточняйте у продавца при оформлении заказа. Если в магазине мало отзывов, рекомендуем предложить продавцу оформить заказ с онлайн-оплатой
Способы оплаты и доставки обсуждаются с продавцом
Local pickup(St. Petersburg)
Free
Доставка по стране(Russia)
by agreement
Условия и сроки доставки можно узнать у продавца до совершения покупки