Phosphor (glow in dark) with 3 color glow

Phosphor (photoluminescent pigment) - pure (unpainted), water-resistant.
Glows in the dark after charging from a light.
The duration of the emission: more than 8 hours

The price is for 1 jar20 gr.
Don't forget to specify the desired color.

Colors available:
№ 1 glow Color: Yellow-green (bright green).
№ 2 glow Color: Blue-green (turquoise).
№ 3 glow Color: Sky blue (blue).

Universal decorative product. The scope of its application has no boundaries!

Method of application:
The basis, whether varnish or epoxy resin, added phosphor in a ratio of 20:1 (where 20 parts of the varnish or epoxy resin and - 1 part of the phosphor), up to 1:1 - individually for your project.
Methods of applying the resulting composition to the surface can be different: brush, roller, sponge, spray gun, airbrush.
After every 1 - 2 minutes, be sure to mix the paint composition so that the phosphor does not precipitate!
If necessary, you can apply a second coat of paint after drying the first. There is no need to apply more than two layers of phosphor.
With the introduction of the phosphor in the paint, for added protection, base layer, apply the final layer of colorless nail Polish.

Attention! The actual color of the item offered may vary from the monitor image. This is due to the different settings of the monitor and its color, as well as the method of processing photos.

IMPORTANT to KNOW: luminophore glow in the dark always occurs on a fading schedule. First of all, after recharging the phosphor, we see in the dark its peak brightness - this is the brightest and not very long-lasting glow of the powder in the dark, then the brightness decreases uniformly for several hours.