Springs for stone (silver) with a loop: 30/25 ;25/20 and 18/15 mm

the cost per piece.
There are three dimensional rows.
Dimensions :
1) 30/25 mm, where 30 mm is the height with a loop/ 25 mm is the width ( size without a loop: 22/25 mm)

2) 25/20 mm, where 25 mm is the height with a loop/ 20 mm is the width ( the size of the spring without a loop: 20/20 mm

3) 18/15 mm, where 18 mm is the height with a loop/ 15 mm is the width of the spring (the size of the spring without a loop: 14/15 mm

We will help you choose the springs for your or our stones)
Flat versions in the form of dies or cabochons in a spring will not work)

The range of springs is designed for any rounded and untreated stones of an oblong, oval, pear-shaped or absolutely round shape, but not a flat shape - cabochons, dies-will not fit into the spring (the mineral will "fall out" through the side "ribs" of the spring).
Also, the springs are suitable for small, medium and large crystals.

This spring spiral shape, perfectly serves as a kind of " holder "for your stones..
The stone falls into the elastic spiral very easily - with one movement of the fingers, pushing the elastic ribs of the spring. Each spring has a loop on top, for leather, canvas, braided,rubber,silicone or silk cord or chain.


Wire for jewelry is made of non-ferrous metals and their alloys:
aluminum, brass, copper...
Spirals with a light silver coating (Sterling Silver), which protects against corrosion.
But still, despite this,the spiral spring made of bijouterie wire is not resistant to high humidity, does not tolerate the ingress of perfume and cosmetics...but there is a pleasant " not"..
-does not stick to skin;
- does not create discomfort when used;
- No scratches.

We recommend to remove the "products with a spring" before sports, bathing in the bathroom or going to the beach.

These are natural phenomena that can affect your choice.