Unique power support for mounting and fixing heavy stone or other table top material to a vertical surface. The uniqueness of the project is to solve the problem of compensation of large loads with small forms of support systems. Perhaps this bracket is one of the few options that can solve this problem.
You can find brackets that can hold a heavy countertop weighing 50-100 kg, but, as a rule, these are rather bulky elements with protruding forms and not very aesthetic appearance. And to establish a table-top and at the same time to get rid of all "excess" under a table and to create impression of absence of support very much there is a wish.
You should pay attention to the bracket "KSM 350/500". The peculiarity of this bracket is its interesting proportions of one of the sizes. At length of 500 mm,height of 350 mm and width of 60 mm depth of its reinforcing struts on length of shelves of an arm makes no more than 22 mm. This size allows you to make this support hidden when installing furniture elements. At the same time, the bracket perfectly copes with the loads placed on it.
There is this element of support one more pleasant moment. Very often (especially in the old housing stock) in places of the planned installation of countertops on the walls is a lot of communication systems of pipes. Carry or hide in the wall this engineering economy is quite troublesome and expensive. But the distance from the wall to the pipes can be placed between them "KSM 330/500" and without much difficulty to fix it on the wall. Thus, both pipes are intact and the head does not hurt. After that, install the sink and become a little happier.
This "focus" can be done not only with pipes, but also when installing console elements, under which there will be cabinets, washing machines, etc. When using these brackets, due to the unique size of 22 mm, under the installed objects there is a very large free space.
The bracket is made of steel sheet metal with a thickness of 4 mm. All-welded construction. Strengthening of the bracket is made in the form of three struts with a thickness of 5 mm. Thus, the entire load is distributed between the three stiffeners of the structure. In each shelf products are made of 5 holes with a diameter of 6 mm. This number of mounting points will allow you to securely fix the bracket to the wall. A secure mount must comply with the permissible load.
The scope of the supports is very different. For installation of table tops, cabinets, shelves of great depths. Installation of beams, steps, canopies, etc. Functionally, they are designed as a supporting device. And what you will support is up to you.
Colors of paint: black, white, bronze. Other colours are available on request.
size: 35h50h6 cm. depth 22 mm.
How to keep
When mounting heavy elements to the wall, the length of the dowel must be at least 10 cm and a diameter of at least 8 mm. The set screws must correspond to the breaking load when taking into account the weight. The bracket can withstand a weight of up to 150 kg or more, but it must be very firmly "tied" to the wall. Better with stock.
Доставка и оплата
Other methods
Доставка от продавца
Способы доставки и оплаты уточняйте у продавца при оформлении заказа. Если в магазине мало отзывов, рекомендуем предложить продавцу оформить заказ с онлайн-оплатой
Способы оплаты и доставки обсуждаются с продавцом
Local pickup(St. Petersburg)
Free
Доставка по стране(Russia)
by agreement
Условия и сроки доставки можно узнать у продавца до совершения покупки