Made to order
Knife T-Rex
Blade from a damask steel (SHKHH15 steel khvg U8A)
Handle-stabilized Karelian birch
Art castings of Nickel silver
Total length - 285 mm
The blade length is 150 mm
The width of the blade 34 mm
Thickness of blade 3,5 mm
The blade hardness - 62 HRC
The genuine leather sheath
Blade from a damask steel (SHKHH15 steel khvg U8A)
Handle-stabilized Karelian birch
Art castings of Nickel silver
Total length - 285 mm
The blade length is 150 mm
The width of the blade 34 mm
Thickness of blade 3,5 mm
The blade hardness - 62 HRC
The genuine leather sheath
How to keep
MAINTENANCE AND CARE OF THE KNIFE
The knife should only be used as a cutting tool.
Never throw Your knife, get the blade on the blade of another knife, do not use the knife as a screwdriver, chisel or can opener, as well as leverage. Do not expose the knife to excessive heat and prolonged exposure to open flame.
Keep Your knife always clean! After use, moisture and other contaminants must be removed before You remove the knife in the sheath.
If Your knife is made from carbon steels (carbon U8, 65G, Damascus steel, etc.) without a coating – it requires care and periodic lubrication.
Wooden knife handle, we recommend to impregnate with linseed oil or beeswax.
During long-term storage of the knife is recommended to keep it out of the sheath.
The knife should only be used as a cutting tool.
Never throw Your knife, get the blade on the blade of another knife, do not use the knife as a screwdriver, chisel or can opener, as well as leverage. Do not expose the knife to excessive heat and prolonged exposure to open flame.
Keep Your knife always clean! After use, moisture and other contaminants must be removed before You remove the knife in the sheath.
If Your knife is made from carbon steels (carbon U8, 65G, Damascus steel, etc.) without a coating – it requires care and periodic lubrication.
Wooden knife handle, we recommend to impregnate with linseed oil or beeswax.
During long-term storage of the knife is recommended to keep it out of the sheath.
