Passport covers, leather, blue

In the case of contamination it is necessary to remove dirt with a damp soft cloth. The surface is not recommended to RUB strongly, as the external fibers can be damaged and the material will lose its quality and appearance. You should then dry the product naturally (at room temperature). Do not dry leather products near fire or heating devices, as this will lead to their deformation. After drying, the leather product must be treated with a skin care product.
To prevent premature aging, it is recommended from time to time to refresh the products of smooth skin with water mixed with soap and ammonia, and then wipe with a cloth moistened with castor oil, glycerin or vaseline for Shine.
Products from white skin are refreshed with a mixture of milk with whipped egg white, and the spots are removed by wiping them with a cut of the bulb.
When cleaning leather products in any case do not use hard solutions: gasoline, acetone, etc.
To restore the former attractiveness of worn skin will help rubbing orange peel.
Heavy fading and crumbling paint can paint nitro aerosol type. Spray paint should be extremely careful not to spoil the surrounding objects and clothes. Apply the paint should be a thin layer, as a thick layer will lead to loss of elasticity and cracks. To mask scratches, scuffs and other skin imperfections, you can use a specially designed liquid skin. It is necessary to apply it evenly with a thin layer on the surface, lightly pressing with a dry sponge to give relief to the skin. After drying, repeat the procedure. In one set are usually 7 colors, which can be mixed to get any shade.
Patent leather does not tolerate low temperatures (from-5S). From the damp and the mud of shiny patent leather gradually fades and is covered with small cracks. Clean such products with a soft cloth and special liquids. Treat them with ordinary Shoe cream can not be, as the lacquer layer becomes dirty and dull.
Wrinkles and small folds on the leather surface-a picture created by nature, they are not defects of the facial layer.

Attention!

Do not expose the product to petroleum products (gasoline, oils, etc.), alkalis, acids, solvents and other chemically active substances.
Dry cleaning can produce an unexpected effect and adversely affect the quality of the product.
Iron or bleach the product is not recommended.
Do not store the product in plastic (cellophane) bags and do not keep it in the bright sun, this can lead to a change in the color of the product and fading!