Floor loom series Z

Floor 8 shafts loom with independent shafts’ management. Equipped with an original spring control mechanism, which allows to compensate the load on the treadles, which provides minimal effort when working on the loom. The control of the reed is made by linear bearings, which creates a comfortable work of the weaver and the ability to regulate the position of the reed relative to the shafts. The design allows to remove the beater and the bream during the filling of the threads, which greatly simplifies the work of the master. Each of the 10 treadles is capable of controlling several shafts simultaneously. Warp is fixed by steel ratchet mechanisms, which ensure a long service life. Heddles and cord used from well-proven materials of the Swedish company TEXSOLV. The width of the woven fabric is 110 cm, 90 cm and 70 cm. All shafts that are not pulled down by a treadle, are lifted by spring system. The spring system also results in easy treadling: once the treadle is pushed down, the weight of your leg is sufficient to keep the shed open.
Sliding beater has a shuttle race, it is adjustable in height and it stays back, close to the shafts to get the optimal shed. At both sides the beater is guided with special bearings along a stainless steel rod. By adjusting the position of the rods you can adjust the height of the beater.
The loom can also be equipped with all necessary tools for productive work of a weaver: warp sticks, benches, double warp & back beam, sectional warp beam, fly shuttle device, temples, raddles etc.
Sectional ward beam work: www.livemaster.ru/topic/1918489-namotka-osnovy-na-sektsionnyj-val-tkatskogo-stanka