Birdhouse handmade ' Pro 50', Bird feeders, Moscow, Фото №1
Item sample 
Description
Distinctive features of the birdhouse "Profi 50":
1. On letke glued sandwich panel of veneer - has the role of protection of the hole and serves as an additive for birds.
2. Increasing the depth of the hole to 60mm - prevents the withdrawal of the Chicks legs and beaks of predators.
3. Glued end is cut - designed to protect from woodpeckers, squirrels, magpies and cats. The direction of the fibers significantly complicates razdalblivaniem and razgryzaniya.
4. The large thickness of the lining 25mm. True natural armor for birdhouse.
5. The painted eaves of the roof - protection from rain.
6. Painted tide of the facade - protection of facade and floor from moisture and decay.
7.The bottom of increased thickness and design not allowing him to slip out while maintaining only one pin.
8. Coated steel mesh as additional protection of the bottom from falling out.
9. Lower mount "Pro". " The ecologist" secured with durable nylon cord. Recommended for urban parks and gardens as a replacement for wire-bound.
10. A large thick wood of the heel, as the entire birdhouse - 23-27mm.
11. Top mount "Pro".
12.Roof with a slope.
13.The mounting "ears" of the roof.
14.The angle of the front/anterior wall - provides an easy escape from the birdhouse Chicks, prevent hanging out with a reverse slope. Prevents the Bay of the hole/of the birdhouse when the storm/oblique rain. Is an additional protection against predators, because it allows them to gain a foothold in the front of the birdhouse.
15.Birdhouse impregnated acrylic composition to increase the water resistance of wood. Vapor saved!
17. Screw on each side - allows the removal of the roof to clean the birdhouse.
18.Bessellieu the perimeter of the birdhouse.
19.Smooth rear wall. Allows you to mount not only on wood, buildings, but also on the pole.
20.Softwood, the last chamber drying, is used on all parts of the birdhouse.
21.Packed in natural gofrokoroba.
22. Additional coverage of the top and ends of the roof to increase its moisture resistance and resistance to UV radiation.
Dimensions (HxWxD): 35x19x25 cm
Roof coating – rubber mastic roofing paint on both sides and two coats of acrylic primer.
Board thickness: 25 mm
The diameter of the hole: 50 mm
The depth of the hole: 6 cm
Weight: 3,5 kg
Comes in a box
1. On letke glued sandwich panel of veneer - has the role of protection of the hole and serves as an additive for birds.
2. Increasing the depth of the hole to 60mm - prevents the withdrawal of the Chicks legs and beaks of predators.
3. Glued end is cut - designed to protect from woodpeckers, squirrels, magpies and cats. The direction of the fibers significantly complicates razdalblivaniem and razgryzaniya.
4. The large thickness of the lining 25mm. True natural armor for birdhouse.
5. The painted eaves of the roof - protection from rain.
6. Painted tide of the facade - protection of facade and floor from moisture and decay.
7.The bottom of increased thickness and design not allowing him to slip out while maintaining only one pin.
8. Coated steel mesh as additional protection of the bottom from falling out.
9. Lower mount "Pro". " The ecologist" secured with durable nylon cord. Recommended for urban parks and gardens as a replacement for wire-bound.
10. A large thick wood of the heel, as the entire birdhouse - 23-27mm.
11. Top mount "Pro".
12.Roof with a slope.
13.The mounting "ears" of the roof.
14.The angle of the front/anterior wall - provides an easy escape from the birdhouse Chicks, prevent hanging out with a reverse slope. Prevents the Bay of the hole/of the birdhouse when the storm/oblique rain. Is an additional protection against predators, because it allows them to gain a foothold in the front of the birdhouse.
15.Birdhouse impregnated acrylic composition to increase the water resistance of wood. Vapor saved!
17. Screw on each side - allows the removal of the roof to clean the birdhouse.
18.Bessellieu the perimeter of the birdhouse.
19.Smooth rear wall. Allows you to mount not only on wood, buildings, but also on the pole.
20.Softwood, the last chamber drying, is used on all parts of the birdhouse.
21.Packed in natural gofrokoroba.
22. Additional coverage of the top and ends of the roof to increase its moisture resistance and resistance to UV radiation.
Dimensions (HxWxD): 35x19x25 cm
Roof coating – rubber mastic roofing paint on both sides and two coats of acrylic primer.
Board thickness: 25 mm
The diameter of the hole: 50 mm
The depth of the hole: 6 cm
Weight: 3,5 kg
Comes in a box
How to keep
Hang birdhouse at a height of 3 m. Birdhouse should look towards the East or South-East - this is the most optimal side of the world. Birdhouse can be cleaned in a few years (the roof is removed). Be sure to do this procedure only in winter, as in the breeding material are various insects and parasites of birds.
Доставка и оплата
Local pickup
(Moscow)
Free
Shipping
(Russia)
by agreement
Условия и сроки доставки можно узнать у продавца до совершения покупки
Shipping
worldwide delivery
by agreement
Условия и сроки доставки можно узнать у продавца до совершения покупки
С этим товаром покупают
Related searches
Powered by Yandex.Translate
Birdhouse handmade " Pro 50"