Wooden box

My name is Anna, and until recently, I has been an observer of the Livemaster creative life. Having gained courage and some experience, I decided that it was time to come out of the shadows! Therefore, I would like to meet and tell a little about myself. I has been drawing almost all my life (except ...

This time I will tell you how I made tree bark imitation. To do this, you will need a lot of papier-mache mass and acrylic paints. In addition, I used wood stain, but it is not required. It turned out just superb! It feels like the bark of a tree!

Today I will tell you and show how you can make such a carrier box :) I made it for the table setting on the future terrace, which we will build soon. Later, it will join the kitchen set. To do this, you need the following sections of the boards of  7, 4 cm wide: - bottom — 3 segments of 25 ...

Today I am going to show you how to make a useful thing out of a useless case I have found in my garage! To do it, you`ll need the following: 1) case; 2) fet saw; 3) fireboard; 4) acrylic paint; 5) PVA glue; 6) craquelure varnish; 7) acrylic enamel. At first, I measured the length and width of the ...

There is nothing difficult in carving. First, cut out an item out of a wooden blank and then just smooth out the edges. But the skill is worth being practised. Draw the shape of the horses or any object you want to carve out. Draw the, from all sides of a wooden blank: Smooth the edges: Now ...

This DIY is devoted to the restoration and decoration of wooden boxes. Equipment: work surface sandpaper coating putty knife rags primer acrylic paint сraquelure varnish bronze paste for grout acrylic contours acrylic varnish brushes: synthetic and bristle turpentine capacity for water and ...