Water-based patina (6 colors)

Video on working with these patinas:
www.livemaster.ru/topic/3507282-blog-obzor-novinok-bystraya-patina-metallik-patina-na-vodnoj-osnove?inside=0&wf=0

The water-based patina is a matte composition that creates a decorative tinted coating on the surface of the work with an effect that simulates the aging of metals. Enhances the patina effect on textured and smooth surfaces, emphasizing the depth of the relief.
The method of operation:
The work surface must be dry and clean. Apply the patina with a brush, sponge or palette knife. On one product, it is recommended to alternate several different colors of patina, to obtain a more accurate effect of metal aging.
If necessary, dilute with water, no more than 10%. Remove the excess patina with a soft cloth or rag until the texture appears.
Store at a temperature of about 40 C, tightly closed, out of the reach of children.
In case of contact with eyes or skin, rinse with plenty of running water.

The composition can withstand freezing to -25 C
Defrost at a temperature above 20 C and
Stir until a homogeneous mass.

Colors available:
1. Bronze oxide
2. Blackening
3. Copper oxide firefly
4. Copper oxide dark
5. Light rust
6. Dark rust