This set was used primarily by riders, the vtok served as the tip on the back of the spear and thereby shifted the point of balance of the spear, thereby providing a more comfortable static hold of the spear during a horse-drawn collision.
The spear is made by hand forging with the use of forging welding of 2 parts (the sleeve is welded by forging welding to the blade). The blade of the spear tempered 50-52 HRC, not sharpened. Vtok is forged from one piece and welded by forging welding.
The spear has passed the following tests: load 70 kg on the deflection, throws on the concrete floor (without deformation), a break with the tip of 1 cm of pine Board (without deformation).
It is also possible to make a spear from other steels, for an additional fee.